Suzhou Dingjiahe Automation Equipment Co., LTD. We are about the maintenance and protection of the three selection equipment, optical impression detection equipment, is a kind of impression viewer, used for impression selection of machinery and equipment, Impression detection equipment is a high-tech content of things, these high-tech equipment need our protection and maintenance, want to use a little longer, we need to protect them normally.

Let's take the optical impression security inspection machine as an example to show that in order to make the optical impression security inspection equipment have a long service life, protection and maintenance is essential. How does the automatic screening machine protect the optical impression detection equipment? Actually, it's very simple. We should form the good habit of using the equipment. We should take good care of the equipment. What we mainly need to do is:

1: Regularly check the wear and tear conditions of wearing parts and sliders, and whether you need to use whole voids or replace new parts;

2: Regularly check whether the lens screws and the camera are loose;

3: Check whether the orientation of the light source changes regularly;

4: timing smooth transmission parts and bearings to avoid damage due to lack of oil;

5: Regularly clean the dust on the lens and light source. Rubbing with alcohol is appropriate, but not too much. Can be immediately transpiration;

6: three points of combination: water once a day; Special smoothing oil is added regularly to the air smoother; Air filter screen is replaced once a week;

7: Should regularly check the touch condition of the circuit, see whether the wire is broken, broken or aging, and clean the dust and debris in the electrical box;

8: The glass plate should be viewed regularly for a long time, especially when the glass plate is skewed;

9: The correct touch of the automatic screening machine and the glass plate must ensure the appropriate distance, neither affecting the feed, nor damaging the glass;

10: The automatic screening machine regularly checks whether there are iron chips on the glass plate to avoid continuous scratching of the glass plate, otherwise the glass plate will be scraped away;

11: Adhere to the machine neat, strict switch order operation. If you are unsure of the cause of the problem, call the manufacturer as soon as possible. Do not disassemble the equipment at will, otherwise it will lead to greater errors and equipment damage.