As everyone knows, in recent years, optical automatic screening machine manufacturers have sprung up like mushrooms, and the commodity technology and service projects of various enterprises are different, each screening machine is less than 100,000, hundreds of thousands, and even higher. So, how to choose the suitable screening machine? Xiaobian summarizes the following work experience:

1. Screening rate

Rate determines production capacity. If you want to use machines and equipment to replace many human resource tests, rate must be the main factor to consider. The optical screening machine can screen out 100% good and bad products through the intelligent machine screening and the speed is faster, the detection efficiency: 200-800pcs /min

2. Brush selection precision

It is often felt that to improve precision, you must improve the camera equipment. But in fact, precision can also be compromised by lighting effects and wide-angle lenses. Therefore, it is unnecessary to blindly follow the trend of the pursuit of perfect high-precision camera, moderate light source and wide-angle lens can consider people's usual inspection requirements.

3. Shareability

Thousands of standard parts lean production methods, specifications model specifications are different. For standard parts manufacturing enterprises, each equipment can test a variety of goods, and the automatic identification machine that applies to different specifications can meet the greater use value of the practitioner's project investment detection machine.

4. After-sales maintenance services and optical software

In addition to the machine and equipment customer service problems often encountered in the opening, more special attention is paid to the hardware configuration warranty and system update capability. This problem is particularly likely to occur on software with a high technical threshold.

5. Test items

Standard parts in the process of processing is inevitably caused by defective products, manual service inspection time-consuming and laborious. In fact, if the light is properly designed, design ideas for the characteristics of the product, so that the reflective surface of the product for the light source is properly projected onto the lens, and the problems such as head cracks, crushing injuries, dental hole blockage, and deformation are easy to be dealt with.