The sorting board of the eddy current sorting machine should pay attention to the adjustment screw when adjusting, and the adjustment amplitude should be small, so as to avoid the sorting board being crushed by the belt. Under normal circumstances, the size of the separation board needs to be grasped by individuals according to the material when using, and the same material does not need to be adjusted after the separation board is fixed.

The vortex current separator first opens the separator and adjusts the belt speed to the appropriate operating speed. Unscrew the separator and adjust the separator to the appropriate height. Secure the screws on the separator to ensure that the separator does not move up or down. Tighten the adjusting screws on the sorting board and loosen the adjusting screws. The automatic picker adjusts the adjusting screw to the appropriate position (the distance between the separator and the belt). After the automatic screening machine tightens the fixing screw on the adjusting screw, the test machine test interval is reasonable.

Eddy current separator is an effective method for recovering non-ferrous metals. It has the advantages of good sorting effect, strong adaptability, good mechanical structure, light structural weight, strong repulsion (adjustable), high sorting efficiency and large processing capacity. It can separate some non-ferrous metals from electronic waste, mainly used to separate copper, aluminum and other non-ferrous metals from the mixture of electronic waste recycling production lines, and can also be promoted in the field of environmental protection, especially in the non-ferrous metal recycling industry.

When the eddy current separator is in operation, regularly check the quality and oil level of the reducer and the lubricating oil in each box, and replace it regularly according to the decomposition and oxidation degree of the oil. When replacing the oil, remove the hole cover, inject the mechanical oil, and offset the oil to the center line of the cursor pointer. While changing the oil, clean the dirt and other parts of the gearbox. In use, all operating parts injected with lubricating oil must be regularly injected with lubricating oil according to the field use.